Although I'm not experiencing disconnects and I'm pretty happy with speeds, I'm kind of concerned with my power levels on both downloads ( too many correctables ) and the high power levels of the upstream bonded channels.
Is there anything below to make me overly concerned or should I be contacting Cox with a request to get a tech engineer in to stabilize the numbers.
Do numbers that are out of whack put unnecessary stress on the cable modem? I'm on Cox's Premier Tier and the area has been upgraded to the 50MB speeds.
Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 855000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK 161001_vm2.0_d.cfg
Security Enabled BPI+
Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 88 855000000 Hz -8.6 dBmV 37.9 dB 57170 4022
2 Locked QAM256 85 837000000 Hz -8.6 dBmV 38.6 dB 49070 3742
3 Locked QAM256 86 843000000 Hz -8.6 dBmV 37.5 dB 51045 4344
4 Locked QAM256 87 849000000 Hz -8.6 dBmV 38.2 dB 52708 3851
5 Locked QAM256 93 861000000 Hz -8.3 dBmV 38.5 dB 41115 2761
6 Locked QAM256 94 867000000 Hz -8.7 dBmV 38.1 dB 50611 3677
7 Locked QAM256 95 873000000 Hz -8.3 dBmV 38.1 dB 45946 3209
8 Locked QAM256 96 879000000 Hz -8.4 dBmV 37.7 dB 49712 3672
Total Correctables Total Uncorrectables
397377 29278
Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 3 5120 Ksym/sec 23600000 Hz 51.0 dBmV
2 Locked ATDMA 2 5120 Ksym/sec 31700000 Hz 52.5 dBmV
3 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
4 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Thanks for any info!
↧