Hey guys,
Currently shopping for a new D3 modem. We have a SB6120 on latest firmware currently and it works great. Bonding 4/1 right now in OC 92606. On premier planning to upgrade to ultimate in the next few days. I've read abit about SB6180 vs SB6141, and it seems that SB6180 has 32mhz spacing instead of 96mhz spacing on the SB6141 or something like that. Which one would be better for me? I don't need the best throughput, but rather lower latency AS MUCH as possible ( jitter as well )
Here are my signal levels uptime is 2 days:
Downstream Bonding Channel Value
Channel ID 1 2 3 4
Frequency 573000000 Hz 579000000 Hz 585000000 Hz 591000000 Hz
Signal to Noise Ratio 37 dB 37 dB 37 dB 37 dB
Downstream Modulation QAM256 QAM256 QAM256 QAM256
Power Level
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
-1 dBmV 0 dBmV -1 dBmV -1 dBmV
Upstream Bonding Channel Value
Channel ID 1
Frequency 23810000 Hz
Ranging Service ID 251
Symbol Rate 5.120 Msym/sec
Power Level 41 dBmV
Upstream Modulation [3] QPSK
[3] 64QAM
Ranging Status Success
Signal Stats (Codewords) Bonding Channel Value
Channel ID 1 2 3 4
Total Unerrored Codewords 8231120976 8231121121 8231121198 8231120951
Total Correctable Codewords 644 319 258 559
Total Uncorrectable Codewords 4959 5071 5110 5080
↧
