So some days ago Cox turned on 100/20 in my area which is north of bell on 7th st in north phoenix..
I still have 6X3 on my DPC3010 tho not 8X4..
[att=1]
My slight issue and observation is that the latency has increased and jitter has increased. This makes sense as everybody on this top tier went to 100/20 and this additional load caused more stress on the backbone..
I chart latency with pings once a second to the cox gateway. The chart below shows 30 days of charting. The red packet loss is me doing stuff on the network.
You can clearly see where they switched on the 100/20 and the latency change is obvious.. At peak times latency is up 10% and jitter climes up 22%. That is actually a tad significant..
I didn't expect that. I thought latency would go down with a better connection.
[att=2]
↧